RISK CONTROL IN THE SMOKED TILAPIA PRODUCTION PROCESS USING THE HIRARC AND FTA METHODS

• Mia Nur Faidah

  Muhammadiyah University of Sidoarjo, Indonesia

• Inggit Marodiyah

  Muhammadiyah University of Sidoarjo, Indonesia

Objective: The aim of this research is to determine what factors cause work accidents and determine appropriate and effective risk control strategies. Method: The methods used to carry out the analysis are the HIRARC (Hazard Identification, Risk Assessment, and Risk Control) and FTA (Faut Tree Analysis) methods. Results: The results of this research are able to reduce the risk of danger arising from work accidents by requiring workers to wear gloves and boots during the production process. Novelty: In the process of producing smoked tilapia there is a risk of dangers that have the potential to cause work accidents. The dangers that often occur are cuts on the hands, injuries to the hands during production activities and exposure to sparks due to lack of caution. Therefore, it is necessary to make efforts to prevent work accidents and work-related diseases, one of which can be done by means of risk analysis.

L. Hudi, I. A. Saidi, R. B. Jakaria, P. A. Kusumawardani, and A. R. As’at Rizal, “Pengembangan Pelaku Umkm Mujair Asap Dusun Pelataran Desa Penatarsewu Kec. Tanggulangin Kab. Sidoarjo Jawa Timur,” jpmim, vol. 2, no. 02, pp. 55–59, Sep. 2021, doi: 10.33221/jpmim.v2i02.672.

I. Muhammad and I. H. Susilowati, “ANALISA MANAJEMEN RISIKO K3 DALAM INDUSTRI MANUFAKTUR DI INDONESIA: LITERATURE REVIEW,” PREPOTIF, vol. 5, no. 1, pp. 335–343, Apr. 2021, doi: 10.31004/prepotif.v5i1.1635.

I. Marodiyah and I. Sudarso, “ANALISA RISIKO GUNA PENINGKATAN KUALITAS PROSES PEMBANGUNAN GEDUNG BERTINGKAT,” 2020.

T. Aven, “Risk assessment and risk management: Review of recent advances on their foundation,” European Journal of Operational Research, vol. 253, no. 1, pp. 1–13, Aug. 2016, doi: 10.1016/j.ejor.2015.12.023.

R. Indrayani, J. Sastradiharja, and M. Rosanah, “IDENTIFIKASI RISIKO KERJA MENGGUNAKAN METODE HIRARC PADA UMKM TAHU DI BANDUNG,” Sistemik, vol. 9, no. 01, pp. 23–27, Jun. 2021, doi: 10.53580/sistemik.v9i01.52.

R. Wardhana and Lukmandono, “Design Cost Control in Risk Management with the Expected Money Value (Emv) and Hirarc Method at Pt Xyz Jawa Timur Surabaya,” prozima, vol. 4, no. 1, pp. 12–22, Mar. 2021, doi: 10.21070/prozima.v4i1.1276.

L. D. Fathimahhayati, M. R. Wardana, N. A. Gumilar, and J. S. No, “ANALISIS RISIKO K3 DENGAN METODE HIRARC PADA INDUSTRI TAHU DAN TEMPE KELURAHAN SELILI, SAMARINDA,” vol. 7, no. 1, 2019.

P. Giananta and J. Hutabarat, “ANALISA POTENSI BAHAYA DAN PERBAIKAN SISTEM KESELAMATAN DAN KESEHATAN KERJA MENGGUNAKAN METODE HIRARC DI PT. BOMA BISMA INDRA,” vol. 3, no. 2, 2020.

M. Shafiee, E. Enjema, and A. Kolios, “An Integrated FTA-FMEA Model for Risk Analysis of Engineering Systems: A Case Study of Subsea Blowout Preventers,” Applied Sciences, vol. 9, no. 6, p. 1192, Mar. 2019, doi: 10.3390/app9061192.

R. H. A. Tanisri and D. Siregar, “Pengendalian Bahaya dan Risiko K3 Menggunakan Metode HIRADC dan FTA Pada Industri Kerupuk,” 2022.

A. A. Hidayat, “Analisis Program Keselamatan Kerja dalam Usaha Meningkatkan Produktivitas Kerja dengan Pendekatan HIRARC dan FTA (Studi Kasus: PT Mitra Karsa Utama),” vol. 1, 2020.

Candrianto, K3 DAN LINGKUNGAN. Yogyakarta: CV Bintang Semesta Media, 2023.

Hana Catur Wahyuni; Wiwik Sulistiyowati;Muhammad Khamim, Pengendalian Kualitas. Yogyakarta: Graha Ilmu, 2015.

J. Haekal, “Quality Control with Failure Mode and Effect Analysis (FMEA) And Fault Tree Analysis (FTA) Methods: Case Study Japanese Multinational Automotive Corporation,” International Journal Of Scientific Advances, vol. 3, no. 2, 2022, doi: 10.51542/ijscia.v3i2.14.

N. F. Fatma and D. E. M. Putra, “USULAN PERBAIKAN PADA PENERAPAN SISTEM MANAJEMEN KESELAMATAN DAN KESEHATAN KERJA DI PT. SURYA TOTO INDONESIA TBK DIVISI SANITARY DENGAN METODE HIRA DAN FTA,” JIM, vol. 6, no. 1, p. 27, Feb. 2021, doi: 10.31000/jim.v6i1.4116.

S. Faiz and F. Yuamita, “Identifikasi Potensi Bahaya pada Area Peleburan Logam Menggunakan Metode Hazard Identification Risk Assesment And Risk Control (HIRARC) dan Fault Tree Analysis (FTA) di CV. Barokah Logam Sejahtera,” 2023

E. Krisnaningsih, P. Gautama, and M. F. K. Syams, “USULAN PERBAIKAN KUALITAS DENGAN MENGGUNAKAN METODE FTA DAN FMEA,” vol. 4, no. 1, 2021.

R. Y. H. SUSY SUSANTY, “PERBAIKAN KUALITAS PRODUK KERATON LUXURY DI PT. X DENGAN MENGGUNAKAN METODE FAILURE MODE and EFFECT ANALYSIS (FMEA) dan FAULT TREE ANALYSIS (FTA)*,” Jurnal Online Institut Teknologi Nasional, vol. 3, no. 3, pp. 137–147.

• VIEW ARTICLE

• Economic Integration

Copyright (c) 2025 Mia Nur Faidah, Inggit Marodiyah

This work is licensed under a Creative Commons Attribution 4.0 International License.