QUALITY CONTROL IN IMPROVING PRODUCT QUALITY IN THE FINISHED GOODS WAREHOUSE OF PT. INDOFOOD NOODLE DIVISION SEMARANG USES THE PDCA (PLAN-DO-CHECK-ACTION) METHOD

Hotliana Dewi Sari Saragih; Luluk Fauziah

doi:10.61796/ijeirc.v1i9.127

Authors

Hotliana Dewi Sari Saragih Logistics management and administration, Universitas Diponegoro
Luluk Fauziah Logistics management and administration, Universitas Diponegoro

DOI:

https://doi.org/10.61796/ijeirc.v1i9.127

Keywords:

Product quality, Quality, Control

Abstract

With the progress of modern times, the competition between companies is becoming more and more stringent, one of which is seen from the quality of the goods produced, to produce goods of quality then the control of the products produced is carried out. This research was carried out at Indofood CBP Successful Wealth Noodle Division Semarang where many defective items were still found in the warehouse so that control and repair processes on defective products and goods were still needed. The purpose of this research is to know the quality control (Quality Control) in improving the quality in the finished goods warehouse as well as to know obstacles in enhancing the quality of the products produced, where the company needs to carry out the control of the product quality because there are still many defects in the warehouse of finished products. This research uses qualitative research methods with a descriptive approach. Research data sources use primary and secondary data sources used as information sources. In data collection by conducting field observations, interviews and documentation. The results of this study show that quality controls on products have been carried out from raw materials to the delivery of products to consumers, but can not be said well because there are still found defects on the products produced, caused by humans, machines, and methods, so there is still need to improve on controls, methods and machines

References

. A. Amartya and N. A. Mahbubah, "Managing Quality of the Carton Box Production Process CV GGG Using New Seven Tools Method," Serambi Eng., vol. 7, no. 2, pp. 3011–3021, 2022.

. P. Artaya, Konsep Kualitas Dan Pelayanan Yang Sangat Memuaskan, Narotama Univ. Press, 2018.

. Djafri and Rahmat, Buku Ajar, 2017.

. Y. Erdhianto, "Quality Control Analysis to Reduce the Number of Defects in the Packaging of PG Kremboong Sugar Products Using Seven Tools Method," Tibuana, vol. 4, no. 1, pp. 28–35, 2021.

. N. F. Fatma, H. Ponda, and P. Handayani, "Penerapan Metode PDCA Dalam Peningkatan Kualitas Pada Product Swift Run di PT. Panarub Industry," J. Ind. Manuf., vol. 5, no. 1, p. 34, 2020.

. M. Huda and W. Safitri, "Analysis of Production Control, Quality Control, and Total Quality Management Against Product Failure," Kontigensi: J. Ilmiah Manajemen, vol. 9, no. 2, pp. 644–652, 2021.

. R. Husaini, "Analisis Pengendalian Kualitas Produksi Untuk Mengurangi Tingkat Kerusakanan Produk Tutup Botol Menggunakan Metode Six Sigma Pada PT. XYZ," Range Manage. Agrofor., vol. 4, no. 1, pp. 1–15, 2020.

. Kuswardana et al., "Analisis Penyebab Kecelakaan Kerja Menggunakan Metode RCA (Fishbone Diagram Method and 5-Why Analysis) di PT. PAL Indonesia," in Conf. Safety Eng. Appl., pp. 141–146, 2017.

. N. A. Pratama, M. Z. Dito, O. O. Kurniawan, and A. Z. Al-Faritsy, "Analisis Pengendalian Kualitas Dengan Metode Seven Tools Dan Kaizen Dalam Upaya Mengurangi Tingkat Kerusakanan Produk," J. Teknol. Manaj. Ind. Terapan, vol. 2, no. 2, pp. 53–62, 2023.

. W. D. Nugroho, N. J. K. Jakti, M. A. N. Rochman, and A. J. Nugroho, "Analisis Pengendalian Kualitas Produk Gula Dan Biaya Kualitas Dalam Menunjang Efektivitas Produksi (Studi Kasus: PT Madu Baru PG Madukismo)," J. Teknol. Manaj. Ind. Terapan, vol. 2, no. 2, pp. 72–81, 2023.

. Nurholiq, O. Saryono, and I. Setiawan, "Analisis Pengendalian Kualitas (Quality Control) Dalam Meningkatkan Kualitas Produk," J. Ekonologi, vol. 6, no. 2, pp. 393–399, 2019.

. S. Putri and F. Primananda, "Quality Control on Minimizing Defect Product on 20 OE Yarn," J. Ilmiah Tek. Ind., vol. 20, no. 1, pp. 81–88, 2021.

. R. Ratnadi and E. Suprianto, "Pengendalian Kualitas Produksi Menggunakan Alat Bantu Statistik (Seven Tools) Dalam Upaya Menekan Tingkat Kerusakan Produk," J. Indept, vol. 6, no. 2, p. 11, 2016.

. O. Y. Sari, "Analisis Pengendalian Qualitas Produk Dengan Metode SQC (Statistical Quality Control)," JENIUS: J. Terapan Tek. Ind., vol. 2, no. 1, pp. 41–50, 2021.

. P. Shobur et al., "Analisis Pengendalian Kualitas Produk Kerusakan di PT KPM Menggunakan Pendekatan Six Sigma," 2020.